AEG TSC7G181ES User Manual page 25

Problem
appears on the
display.
The symbol ap‐
pears and the alarm indica‐
tor is on.
The or
or symbol and the
current setting appear alter‐
nately every 5 seconds and
the alarm indicator is on.
If the advice does not lead to
the desired result, call the
nearest Authorized Service
Centre.
8.2 Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
Possible cause
The appliance is in the dem‐
onstration mode.
Communication problem.
Temperature sensor prob‐
lem.
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer
to installation instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
ENGLISH
Solution
To exit the demonstration
mode, press and hold the
Extra Cool and ECO buttons
for approximately 10 sec‐
onds until you hear 3 short
beeps.
Contact the nearest Author‐
ised Service Centre. The
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible.
Contact the nearest Author‐
ised Service Centre. The
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible.
25