DAV TECH PDP-005 Installation And Maintenance Manual page 7

6 DISASSEMBLY/ASSEMBLY OF A PDP PUMP
PDP Pump Disassembly order:
1. In case of MIX-CAP(C TYPE), turn it
counterclockwise to disassemble it.
2. Separate four WRENCH BOLTS to
separated a MIX-ADAPTER.
3. Turn a STATOR LOCK NUT
counterclockwise to separate it. .
4. Separate a WRENCH BOLT to separate it
from TWIN BLOC. .
5. Separate a WRENCH BOLT to separate
it from CHAMBER PART and MOTOR
HOUSING.
6. Turn a STATOR counterclockwise to
separate it. (With a REPAIR TOOL)
7. Separate a WRENCH BOLT to separate it
from a CHAMBER.
8. Separate a SEAL BLOCK.
2K VOLUMETRIC PUMPS PDP
. 7
pag