Nikon FA Instruction Manual page 24

4
Confirm that automatic multi-
• pattern metering is in operation
by making sure that the metering control
button is in the normal "out " position and
the red index is not on top (refer to page
40 for more information).
_ _ 115
_ 115
. . 115
5
Look through the viewfinder and check the exposure
• information_ The
shutter speed you set is shown at the
upper right-hand corner. When the shutter release button is '
depressed halfway, the LCD at the upper left-hand corner shows'
the aperture (a number preceded by F) selected by the camera
to match the shutter speed you selected.
If the LCD shows the shutter speed (a number without F), this
means you cannot obtain the correct exposure at the shutter
speed you selected and the camera is overriding your choice
by automatically selecting a slower or faster speed.
With an AI-modified Nikkor lens, Nikon Teleconverter TC-200,
TC-300 or TC-14, PK ring or bellows attachment attached , the
LCD shows F-- , instead of the aperture selected by the camera.
In the same way, a shutter speed will appear instead of the F-- ,
if the camera automatically modifies the shutter speed you
selected to obtain correct exposure.
25