Advertisement
@REAR
PANEL
© FM/AM ANTENNA terminals
Use these
antenna
terminals
for reception
of FM and AM
broad-
casts.
® GND terminal
Connect to the ground
lead of a turntable.
@® INPUT jacks
PHONO
.... Connect to the output cables from a turntable.
(2: & ener res Connect ta the output jacks of a compact disc player.
® VDP/CDV jacks
{VIDEO IN)
When
watching
the video
image from a LD piayer (VDP) or
a CDV
player used for playback, connect its VIDEO
OUTPUT
jack here.
[AUDIO IN (L, R})
When
playing back the audio channel from a LD player (VDP} or a
CDV for playback, connect
its AUDIO
OUTPUT
jacks here.
® VCR/TAPE 1 jacks
[VIDEQ
OUT]
When
recording
program
materials
from
the
video
component
connected to the VDP/CDV
jacks, connect to the VIDEO
INPUT jack
-
of the VCR used for recording.
[VIDEO IN]
When
watching
the video
image
from
a VCR
used
for recording,
connect its VIDEO OUTPUT jack here.
[AUDIO OUT/REC (L, R}]
When
recording program
materials from the video component
connected
to the VDP/CDV
jacks, or when
recording
music
from
an audio component source, connect to the AUDIO INPUT jacks of
the VCR/TAPE 1 used for recording. When connecting a tape deck,
connect with the REC {input} terminais of the tape deck,
[AUDIO IN/PLAY (L, R)}]
When
watching the audio channel from
a VCR used
for recording,
connect
its AUDIO
OUTPUT
jacks here. When
connecting
a tape
deck, connect with the PLAY (output) terminals of the tape deck,
@® TAPE 2/DAT jacks
Connect these jacks to the tape deck or DAT (digital audio tape)
Connecting
for Recording
The tape recording jack (TAPE REC) on the tape deck or DAT shouid
be connected to the REC/OUT
side of the TAPE jack on the receiver
with a pin-plug connecting
cord.
Connecting
for Piayback
Connect
the TAPE
PLAY
jack on
the tape
deck
or
DAT
ana
the
PLAY/IN side of the TAPE jack on the receiver with a pin-plug con-
necting cord,
@ REMOTE CONTROL IN/OUT jacks
IN:
Connect this terminal to other Pioneer components when
-using those components
to control this unit.
VSX-—3300
OUT:
Connect
this terminal
to other
Pioneer
components
when
using
the remote
control
of this unit to control the other
components.
VIDEO OUT TO MONITOR TV jack
Use to connect
a TV set for watching
program
materials from the
VCR or VDP connected
to this unit.
Connect to a monitor TV or to a TV set with video input terminal,
@ VIDEO OUT TO RF MODULATOR
jack'
Use ta connect a TV set for watching
program
materials from the
VCR or VDP connected
to this unit.
Use to connect
a normal
TV set. When
performing
connections,
the RF MODULATOR
JA-RF5
(soid separately)
is required. By cnon-
necting an RF modulator, video signais can be converted to VHF
signals (U.S. channel 3 or 4}, thus allowing this unit to be used to
view the selected source
on a normal television set.
NOTE:
«
A "normal
TV set" as noted above is one for which RF connec-
tions alone are possible.
*
Sound is not output from the TO RF MODULATOR jack. Use the
speakers connected to this unit to listen to the sound.
@ SURROUND LEVEL selector switch
By selecting one of the three positions (L: Low, M; Mid, H: High),
the sound volume from the surround speakers can be changed.
@ SPEAKERS terminals
A: Connect to a first set of speakers (or the front speakers in a sur-
round system),
B: Connect to a second
set of speakers
{or the surround speakers
in a surround
system).
@ AC OUTLETS
[SWITCHED TOTAL 100 W MAX]
Power supplied
through
these
outlets is turned
on and off by the
receiver
POWER
switch.
Total
electrical
power
consumption
of
connected
equipment should not exceed
100 W.
[UNSWITCHED
200 W MAX]
Power flows continually to this outlet, regardless of whether the re-
ceiver is switched
ON or OFF. Electrical power consumption
of the
connected
equipment should
not exceed 200 W.
The
equipment
should
be disconnected
by removing
the
main
plug from the wall socket when not in regular use, e.g. when on va-
cation.
"NOTE:
Do not connect appliances
with high pawer consumption
such as
heaters, irons, or television sets to the AC OUTLETS in order to
avoid overheating or fire risk.
This can cause the receiver to malfunction.
@ Power Supply cord
Advertisement
