MSI G31P Neo2 Series Manual page 56

M S-7392 M ainboard
[Captain]
[Colonel]
[General]
[Commander]
Important
Even though the Dynamic Overclocking Technology is more stable than
manual overclocking, basically, it is still risky. We suggest user to make
sure that your CPU can afford to overclocking regularly first. If you find the
PC appears to be unstable or reboot incidentally, it's better to disable the
Dynamic Overclocking or to lower the level of overclocking options. By the
way, if you need to conduct overclocking manually, you also need to disable
the Dynamic OverClocking first.
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the microprocessor whether the computer is running on battery or AC power. This
field will appear after you installed the CPU which support speedstep technology.
Adjust CPU FSB Frequency
This item allows you to select the CPU Front Side Bus clock frequency (in MHz).
Adjusted CPU Frequency
It shows the adjusted CPU frequency. Read-only.
Advance DRAM Configuration
Press <Enter> to enter the sub-menu and the following screen appears.
Configuration DRAM Timing by SPD
Setting to [Enabled] enables DRAM CAS# Latency automatically to be determined
by BIOS based on the configurations on the SPD (Serial Presence Detect) EEPROM
on the DRAM module.
DRAM CAS# Latency
W hen the Configuration DRAM Timing by SPD sets to [Disabled], the field is
adjustable.This controls the CAS latency, which determines the timing delay (in
clock cycles) before SDRAM starts a read command after receiving it.
3-20
3rd level of overclocking, increasing the frequency by 5%.
4th level of overclocking, increasing the frequency by 7%.
5th level of overclocking, increasing the frequency by 10%.
6th level of overclocking, increasing the frequency by 15%.