Fingerprint Registration The lock is initially configured with factory settings. Hence, it will unlock with any fingerprint until fingerprint registration is complete. Setup 1st Fingerprint - Administrator Long press the preferred finger (finger 1 as in fig 1.2) that you want to set as Administrator finger for over 10- seconds until the blue light starts to blink...
Page 5
Setup Standard User Fingerprints - Other Users Long press the Admin finger (finger 1 as in fig 1.2) until the green light turns on with beep sound. Press and release the standard user finger (finger 3 as shown in figure 1.2) repeatedly for 10-times or until the green light goes off with long beep sound.
Page 6
Scan the QR Code to watch the demo video. C/O. MoonWalker Workafella Sholinganallur, Rattha Group, Level 4, Tower A, TEK Meadows, No 51, OMR, Sholinganallur, Chennai, Tamil Nadu 600119 Contact # +91- 94451 04400 Email Address: support@freakelecs.com...
Need help?
Do you have a question about the DH-S1 and is the answer not in the manual?
Questions and answers