BEFORE YOU START: Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time. Please check the bill of materials before starting (page 14) and make sure all the parts are delivered.
Page 3
Integrated Cap-Washer Washer M8 Slot-Nut M8 M8 X 30 Bracket (DIN 988) 3 15...
Page 8
Vario VESA M8 X 16 Washer M8 Slot-Nut M8 Holder 8 15...
Page 9
Vario VESA Vario VESA Vario VESA M8 X 40 M5 X 20 M5 X 20 If you purchased the Plate Pin Holder (Set Screw) (Set Screw) ‘Triple Upgrade’, please continue on the next page. When parts D9 and D10 are installed like above, monitors are easy to install in a neutral position.
Page 13
Vario VESA M8 X 16 Washer M8 Slot-Nut M8 Holder 13 15...
Page 14
BOX A - SINGLE MONITOR MOUNT BOX C - Xero-Play triple pivot set (upgrade, depending on purchase) PROFILE KIT HARDWARE KIT Part QTY Note Part QTY Note 80X40 Length=1195mm Xero-Play triple pivot adapter HARDWARE KIT Bolt M8 X 40 DIN 912 Bolt M8 X 25 DIN 912 Integrated monitor bracket Nut M8...
Page 15
They can be reached at support@sim-lab.eu Alternatively, we now have a Discord server where there are quite some experienced Sim-Lab customers hanging out. They might just help you along if you ask them nicely ;) www.sim-lab.eu/discord...
Need help?
Do you have a question about the INTEGRATED VARIO MONITOR MOUNT and is the answer not in the manual?
Questions and answers