Table of Contents
Advertisement
EN
NO SPIN BUTTON
By pressing this button it is possible to eliminate the spin-drying
on all programmes. This operation is suitable for programmes
at 90°C and at 60°C in case of special treated fabrics
(cottonova or permanent press) or for mixed delicate fabrics.
RINSE HOLD BUTTON
When this button is selected, the machine stops with the final
rinse water in the drum for mixed fabrics and wool. In this way,
the fabrics are left immersed in the water, preventing them
from creasing, should you be unavailable to remove them
after spinning. When the button is released, the programme
finishes by emptying the water and giving a delicate spin.If
you just want to empty the water (i.e. without the spin),
release the On/Off button, select "Z" and release the Rinse
Hold Button. Press the On/Off button again to drain the water.
62
WASH TEMPERATURE CONTROL KNOB
E
ROTATES IN BOTH DIRECTIONS
With this device it is possible to reduce, but no increase
washing cycle temperature.
The table of programmes indicate the maximum temperature
F
advised for each type of wash.
WARNING: THIS TEMPERATURE MUST NEVER BE
EXCEEDED
TIMER KNOB FOR WASH PROGRAMMES
IMPORTANT:
ALWAYS ROTATE THE KNOB IN A CLOCKWISE
DIRECTION, NEVER IN AN ANTI-CLOCKWISE
DIRECTION. DO NOT PRESS THE "ON" BUTTON (C)
BEFORE SELECTING THE PROGRAMME
The tables describe the washing programme on the basis of
the number or symbol chosen.
ON/OFF INDICATOR LIGHT
EN
I
T°C
L
OK
N
63
Advertisement
Table of Contents
