Philips 109B4074 Electronic User's Manual page 95

The OSD Controls
5) To degauss your screen, press the
CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted.
After returning to MAIN CONTROLS . . .
. . . to continue to ADJUST MOIRE, press the
Smart
highlighted. Next, start with step 3 under EXTRA CONTROLS, ADJUST MOIRE.
Help
. . . to exit completely, press the
ADJUST MOIRE
(Not available in all models)
EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern arising
from the interference between two superimposed line patterns. To adjust your moire, follow the steps below.
Note: Use only if necessary. By activating ADJUST MOIRE, sharpness can be affected.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted.
file:///D|/Rita/LF3/lf3manual/english/OSD/osd_cont.htm (22 of 27) [2002/7/7 ?? 11:16:21]
button. Your screen will be degaussed, then the MAIN
button.
button until EXTRA CONTROLS is