Do you have a question about the Cordless Faux Wood Blind and is the answer not in the manual?
Questions and answers
Patty
June 2, 2025
If I undid all the middle cords and they retracted back into mechanism and they got tangled, how do I fix it?
1 comments:
Mr. Anderson
June 2, 2025
To fix tangled cords in Nien Made Cordless Faux Wood Blinds:
1. Do not cut the lift cord. 2. Remove all bottom rail buttons. 3. Lift the bottom rail to the retained horizontal cords. 4. Cut off the excess outer vertical cords, leaving about 3 inches (76 mm) below the rail holes. 5. Twist the ends of the ladder cords and insert them into the bottom rail holes. 6. Replace the bottom rail buttons. 7. Do not untie the bottom rail buttons from the cords.
This helps re-align the cords and secure them properly.
This answer is automatically generated
Related Manuals for Nien Made Cordless Faux Wood Blind
Summary of Contents for Nien Made Cordless Faux Wood Blind
Page 1
Cordless Faux Wood Blind Persianas de imitación de madera sin cordón...
Page 2
Cordless Faux Wood Blind Installation & Maintenance Instructions Persianas de imitación de madera sin cordón Instrucciones de Instalación y Mantenimiento Please take a moment to review the following installation guide. Properly installed, your new blind will provide you with years of beauty.
Page 3
Check the components | Revise los Componentes Width ( x”) Width ( x”) x ≦37” 2pcs x ≦ 37” 4pcs 37” < x ≦ 47” 3pcs 37” < x ≦ 47” 6pcs 47” < x ≦ 72” 4pcs 47” < x ≦ 72” 8pcs 1 1/4”...
Page 5
Attach End Cap and Valance clip Adjuntar la cabecera del riel superior y los lados superior de la cenefa Valance clip is optional Los lados superior de la cenefa son opcional...
Page 6
Inside Mount | Montaje Interior Page | Outside Mount | Montaje Exterior Page |...
4) Exposición a los elementos, humedad excesiva, pérdida del lustre, decoloración con el paso del tiempo. 5) Cargos de envío, cualquier costo por retiro o reinstalación. Need help? Call Nien Made 1-800-666-1779 Necesita ayuda para? Appel Nien Made 1-800-666-1779...
Need help?
Do you have a question about the Cordless Faux Wood Blind and is the answer not in the manual?
Questions and answers
If I undid all the middle cords and they retracted back into mechanism and they got tangled, how do I fix it?
To fix tangled cords in Nien Made Cordless Faux Wood Blinds:
1. Do not cut the lift cord.
2. Remove all bottom rail buttons.
3. Lift the bottom rail to the retained horizontal cords.
4. Cut off the excess outer vertical cords, leaving about 3 inches (76 mm) below the rail holes.
5. Twist the ends of the ladder cords and insert them into the bottom rail holes.
6. Replace the bottom rail buttons.
7. Do not untie the bottom rail buttons from the cords.
This helps re-align the cords and secure them properly.
This answer is automatically generated