Download Print this page

Advertisement

Quick Links

NOTICE
*Please make sure that you have all parts indicated and they are in good condi�on before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so� surface to prevent scratching the finish during
assembly.
*This item may require periodic �ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email customersupport@safavieh.com
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 60 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Always use felt pads under all ar�cles to prevent discolora�on or so�ening of the lacquer. Plas�c
and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common
hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done with a so� lint
free co�on cloth dampened with water or furniture polish. On highly used surfaces we
recommend applying a quality paste wax which should be used on a regular basis to provide
addi�onal protec�on from scratches and spills. How o�en you apply the wax depends on how
much wear the furniture receives.
Part List
I
K
H
L
x 2
A
N
N
C
M
B
E
G
F
J
E
G
E
Model# NST9600
Product Dimensions: 19"Wx15"Dx23"H
D
E
WARNING :
WEIGHT CAPACITY:
26.4 LBS.
DRAWER LOAD CAPACITY 22 LBS

Advertisement

loading
Need help?

Need help?

Do you have a question about the Galio NST9600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Safavieh Galio NST9600

  • Page 1 *This item may require periodic �ghtening. *If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com PREPARATION Model# NST9600 *Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
  • Page 2: Hardware List

    Hardware List HW1x12 HW2x4 HW3x8 HW4x20 HW5x4 HW6x4 Ø 6 x 30 mm Ø 6 x 35 mm Ø 15 mm Ø 12 mm Ø 8 x 30 mm M 7 x 50 mm HW7x1 HW8x24 HW9x8 HW10x12 HW11x8 HW12x14 M 4.5 x 12.5 mm M 6 x 10.5 mm M 3.5 x 13 mm...
  • Page 3 Part List & HW For Mul�-Box Items Piece Descrip�on Carton Call Piece Descrip�on Carton Call Top Board 1 of 1 Cambolt 1 of 1 1 of 1 1 of 1 Bo�om Board CamLock Big Side Board Le� 1 of 1 1 of 1 CamLock Small Side Board Right...
  • Page 4 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list. If any part is missing or damaged, do not a�empt to assemble the product. Es�mated Assembly Time: 45 minutes. STEP1: Insert Cambolt (HW1) into Front Drawer (H).
  • Page 5 9 RM35A RM35A STEP5: Insert Cambolt (HW1) into Top Board. STEP6: Insert Dowel Big (HW4) into Side Board Le� (C) and Insert Dowel Big (HW4) into Support Board (M) Side Board Right (D). Con�nue with securing part of the metal runner (HW RM35A ) into posi�on as the above image, using screw M6x10.5mm (HW9).
  • Page 6 Not Laminated STEP9: A�ach Back Board (N) and List Joint (HW22) into Top Board (A). STEP10: Insert Bo�om Board (B), secure with Screw M7x50mm (HW6), The laminated surface should be facing backward. �ghten screws using Allen Key (HW7). BC410 ± 2 mm ±...
  • Page 7 ± 2 mm STEP13: Combine components from step 12 with remaining STEP14: Insert Dowel Big (HW4) into Bo�om skirt 1 (F), using M4.5x12.5mm (HW8). assembled Bo�om skirt from previous step. Do not over�ghten screw yet, leave around2mm gap. STEP16: Place the Leg (E) on the center corner brace and insert the screw M6x25mm (HW21) with Allen Key (HW7) into the leg, STEP15: Bring the assembled bo�om skirt and insert into Bo�om Board then �ghten all the screws and remove back paper of...
  • Page 8 Name Plate Position STEP18: Hold the sides of drawer, posi�on the wheel of rail at drawer STEP17: Bring the chest drawer upright, Install Plat L (HW18), back and the wheel of rail at side boards, according to the image. Plat T(HW19) into the provided holes in front edges of the chest drawer. Slide in the drawers one by one into the chest drawer.
  • Page 9 TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE Different wall materials require unique wall fasteners. The wall plugs (AA2) and screws (AA3) are designed for fixing to concrete walls only. Please consult your local hardware store to ensure you are using the correct hardware for your wall type. AA1 x 2 AA2 x 4 AA3 x 4...

This manual is also suitable for:

Galio nst9600cGalio nst9600a