Advertisement
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 60 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com
13
J
14
STEP13: Peel the back paper of Bumper ( HW16) then place on
both frame door,posi�on as shown in the figure.
Insert Top Pin Sliding (HW13) and Bo�om Pin Sliding (HW14)
on both end of frame door as specified posi�on in the figure.
10
11
11
STEP15: Using Wedge (HW10) and Screw M 3.5 x15.5 (HW11)
�ghten the back of media stand with screwdriver.
13
J
16
14
10
16
STEP14: Hold the frame door with posi�on of the upper pin shown in
facing upward. Put the frame door by inser�ng it to the upper groove
on Top Board (1), then place the lower part aligned into the groove
on bo�om board (2).
Repeat this step for the other door. Slide the item's doors le� and right to
ensure the doors have been placed properly.
STEP16: Assembly is completed.
16
16
Advertisement
