Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
HEAVY DUTY
U-JOINT PULLER
CLASS 6, 7 & 8
TRUCKS
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23h
58800
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ICON 58800
Summary of Contents for ICON 58800
- Page 1 HEAVY DUTY U-JOINT PULLER CLASS 6, 7 & 8 TRUCKS 58800 Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
- Page 2 Do not modify this product or use it for a 14. Do not use the U-Joint Puller to compress purpose for which it is not intended. springs or any other item that could disengage and cause a potential hazard. Page 2 For technical questions, please call 1-888-866-5797. Item 58800...
- Page 3 Do not use the factors which cannot be built into this product, U-Joint Puller even if minor damage appears. but must be supplied by the operator. SAVE THESE INSTRUCTIONS. Item 58800 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Functions Forcing Screw Fork Glove Yoke Bearing Cup Drive Shaft Page 4 For technical questions, please call 1-888-866-5797. Item 58800...
- Page 5 4. Repeat steps 1-3 on each Bearing Cup. 2. Install the U-Joint Puller over the Yoke and turn the Forcing Screw clockwise using a wrench or socket until the Bearing Cup is loose. U-Joint Clockwise Puller Yoke Item 58800 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 6 For technical questions, please call 1-888-866-5797. Item 58800...
- Page 7 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175446787 when ordering parts. Item 58800 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Harbor Freight Tools makes every effort to assure that its products meet the highest quality and durability standards. Harbor Freight Tools warrants to the original purchaser of this ICON™ Tool that the parts and components of the ICON™ Tool will be free from defects in material and manufacturing workmanship during the ICON™ Tool’s useful life.
Need help?
Do you have a question about the 58800 and is the answer not in the manual?
Questions and answers