Advertisement
Quick Links
Xantrex Gateway Quickstart Guide
RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION, AND ARC FLASH
This Quickstart Guide is in addition to, and incorporates by reference, the relevant product manuals for
the Xantrex Gateway. Review this Quickstart Guide and then you must read the relevant product manuals
available online. Unless specified, information on safety, specifications, installation, and operation is as
shown in the primary documentation available for the product online. Ensure you are familiar with that
information before proceeding.
Failure to follow these instructions will result in death or serious injury.
Contact Information
Telephone:
Email:
Web:
Product Safety Information
RISK OF ELECTRIC SHOCK AND EQUIPMENT DAMAGE
Connect communication circuits only to Safety Power Source Class 1 (PS1) circuits. This
n
device connects to a 9-65VZ battery source through the two-pin battery terminal (see
Connection Terminals on page 1).
Do not expose the Xantrex Gateway to rain, snow, spray, or bilge water. For indoor use only.
n
Do not disassemble. No user serviceable parts inside.
n
Do not install and/or operate in compartments containing flammable materials or in locations
n
that require ignition-protected equipment.
Failure to follow these instructions may result in injury or equipment damage.
Product Number: 808-1888
Owner's Guide
DANGER
+1-800-670-0707 / +1-408-987-6030
customerservice@xantrex.com
https://xantrex.com/support/get-customer-support/
NOTICE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Xantrex 808-1888
Summary of Contents for Xantrex 808-1888
- Page 1 9-65VZ battery source through the two-pin battery terminal (see Connection Terminals on page 1). Do not expose the Xantrex Gateway to rain, snow, spray, or bilge water. For indoor use only. Do not disassemble. No user serviceable parts inside.
- Page 2 Equipment Directive for RF spectrum and RF safety as well as the EMC Directive for emissions and immunity requirements. Regulatory approval pending. Material List NOTE: If any of the items are missing, contact Xantrex or any authorized Xantrex dealer for replacement. A Xantrex Gateway B microSD card reader C power supply 2-pin connector with pigtail, 14–28 AWG (0.2–1.5 mm...
-
Page 3: Getting Started
Getting started Power up Xantrex Gateway. Make sure the provided micro SD card is inserted in the slot. Power 9-65 VDC... - Page 4 Choose the best way to connect to the Xantrex Gateway device. You have three options. Connect using the optional Gateway Touchscreen device (page 3). Connect through an existing Wi-fi network (go to page 4 first). Connect through a Gateway hotspot (go to page 4 first).
-
Page 5: Connect The Cables
Connect through the Gateway Touchscreen Connect the cables. HDMI Micro-B Back of Touchscreen HDMI Follow the instructions on the Touchscreen. - Page 6 Download the Xantrex App Download the Xantrex App and install it on your smart phone. Proceed to one of the following: Connect through an existing Wi-fi network (page 5). Connect through a Gateway hotspot (page 10).
-
Page 7: Connect To An Existing Wi-Fi Network
Connect to an existing Wi-fi network Tap the Xantrex App then tap your Xantrex Gateway device from the list to initiate the pairing with the device. Xantrex-XGWxxxxxx Gateway XGWxxxxxx six-digit pairing code from your unit’s serial label... - Page 8 Xantrex Gateway Xantrex Gateway Wi-Fi Network WI-FI NETWORK Wi-Fi Network Password ShawOpen VerizonHotspot Select MyOwnWiFi PublicAccess ATTHotspot D O N E...
- Page 9 WI-FI NETWORK MyOwnWiFi Wi-Fi Network Password ******* Apply Cancel MyOwnWifi To connect to: MyOwnWifi...
- Page 10 Change the Country or Region, if applicable. Change the default SSID and password (recommended). XGWxxxxxx_newname new_password Go back to the previous screen.
- Page 11 MyOwnWifi To connect to: MyOwnWifi...
- Page 12 If you have changed your SSID and password from a previous step, such as in [B], then go to your smart phone’s Wi-Fi settings and connect to that network using the new SSID and password. Tap the Xantrex App. -10-...
- Page 13 To connect to: Gateway hotspot If you have changed your SSID and password from a previous step, such as in [B], then you may skip the next and final step. -11-...
- Page 14 Change the Country or Region, if applicable. Change the default SSID and password (recommended). XGWxxxxxx_newname new_password -12-...
- Page 15 IMPORTANT In order to connect the Gateway to each of the various devices, you MUST consult Owner’s Guide proper instructions. Owner’s Guide -13-...
- Page 16 Typical Vehicle Comm u For information purposes only. Network configurations may vary according to your specific application. Gateway Harness 20-Pin to RJ45 XGW (RV-C) (PN: 808-1892) Freedom XC PRO For more information on Connection Terminals, Port Pin Assignments, and RV-C -14-...
- Page 17 9-65VDC power source Harness RJ45 to MPPT XGW (Modbus) (PN: 808-1890) network terminator network hub custom harness Xantrex Battery Harness RV-C CAN 4-Pin to RJ45 XGW (RV-C) (PN: 808-1889) Harness Micro-C to RJ45 XGW (NMEA2000) (PN: 808-1891) terminator settings, see the Owner’s Guide.
- Page 18 End of Life Disposal The Xantrex Gateway is designed with environmental awareness and sustainability in mind. At the end of its useful life, the Xantrex Gateway can be decommissioned and disassembled. Components which can be recycled must be recycled and those that cannot be recycled must be disposed of according to local, regional, or national environmental regulations.
Need help?
Do you have a question about the 808-1888 and is the answer not in the manual?
Questions and answers