Draper 78772 Original Instructions
Draper 78772 Original Instructions

Draper 78772 Original Instructions

2 in 1 soldering iron & gas torch, compact gas torch

Advertisement

2 IN 1
SOLDERING
IRON & GAS
TORCH
78772

1. Specification

Stock No.
Part No.
Fuel type
Fuel capacity
Approx. temperature
Operating time (one gas filling)
Dimensions
Net Weight
2. Health and Safety Warnings
• Observe all standard safety precautions and good
practices when working with naked flames, solder and
flammable fuels.
• Keep the work environment clear and well-lit, with
bystanders at a safe distance.
• Keep this product out of reach of children at all times.
• ALWAYS wear appropriate eye and face protection and
protective gloves when using this product.
− Take additional precautions when using chemicals
like flux or solder paste; refer to the manufacturer
instructions for safe use.
• Check the torch for damaged, clogged or corroded parts
and leaks before every use.
− DO NOT use the product if it is damaged or leaking
in any way; contact Draper Tools for repair and
replacement options.
− If you suspect that the product is leaking gas, move
it to an external environment immediately.
Important: The product can be tested for leaks by
dabbing soapy water solution on joints and
connections while gas is added to or stored in the
product. Leaks will create a steady feed of soapy
bubbles at the breach point.
COMPACT
GAS
TORCH
78776
78772
GT6
Butane
15ml
200–400°C
50 mins approx. at low setting
W 53 × H 185 × D 150mm
170g
78776
GT10
Butane
15ml
1,300°C
50 mins approx. at low setting
W 53 × H 175 × D 100mm
160g
• Use ONLY in well-ventilated environments.
• DO NOT use this product in environments where paint
fumes, solvents and other flammable materials are
present.
• Use only good quality butane gas.
WARNING! Butane gas is highly flammable;
handle it carefully and in accordance with the
instructions on the canister.
• During first use, allow a few minutes for the product to
settle once ignited before directing it towards the
workpiece.
WARNING! The metal parts of the torch become
very hot during use. DO NOT touch the barrel,
soldering tip or workpiece until they have cooled
thoroughly.
WARNING! NEVER direct the product towards
skin, clothing or other flammable materials, or
look directly down the barrel.
EN
Original Instructions
Version 1 – March 2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 78772 and is the answer not in the manual?

Questions and answers

Summary of Contents for Draper 78772

  • Page 1 − DO NOT use the product if it is damaged or leaking   WARNING! NEVER direct the product towards in any way; contact Draper Tools for repair and skin, clothing or other flammable materials, or replacement options. look directly down the barrel. − If you suspect that the product is leaking gas, move  ...
  • Page 2 Fuel level window Ignition button On/off lever Soldering tip Stock No.78776 Stock No.78772 4. Refuelling 3. The fuel level can be viewed through the window (F) beneath the on/off lever (H). WARNING! Before filling the product, ALWAYS 4. Allow a few minutes after filling for the gas in the ensure that both the on/off lever and the flame product to stabilise.
  • Page 3 NEVER allow the product to touch the workpiece. − If using the product as a soldering iron (78772   only), place the soldering tip against the appropriate area of the workpiece and apply solder to the point of contact as required.
  • Page 4 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK Delta International BV, Oude Graaf 8, 6002 NL, Weert, Netherlands 0623...

This manual is also suitable for:

78776

Table of Contents