Fuel Injectors - Ford NEWHOLLAND 2000 Series Service Manual

- - - - - - - - - - - - N E W MODEL SUPPLEMENT------------
Part 2
FUEL SYSTEMS-DIESEL
FORD 2000
and
3000
The fuel injection pumps and injectors of new model
Ford 2000 and 3000 tractors are identical to those used
on the previous model Ford 2000 and 3000 tractors.
FUEL INJECTORS
The- fuel injectors used in new model Ford 4000 and
5000 engines differ from those used in previous Ford
4000 and 5000 engines. The outward appearance of the
new injector is the same as those used on the previous
tractors. The difference between curre11t and previous
injectors is in the size and angle of the nozzle holes
which, without accurate gauges, cannot be readily recog-
nized.
For this reason, when re-conditioning injectors in serv-
ice, special attention should be given to the identifica-
tion code numbers which are etched on the body of the
nozzle. This number in conjunction with the following
chart will enable each nozzle to be identified with the
tractor it was designed for.
Previous Current
New
New
Range
Nozzle
Model Nozzle
Tractors Identification Tractors Identification
Ford 2000 BDLL150S6443 Ford 2000 BDLL 150S6443
Ford 3000 NL 413
Ford 3000 NL 413
Ford 4000 BDLL150S6476 Ford 4000 BDLL140S6422
Ford 5000 NL 413 Ford 5000 BDLL140S6422
FORD 4000 DIESEL-AIR CLEANER
The air cleaner specified for use with the new Ford
4000 diesel engine is the same as that used on the pre-
vious and current Ford 5000 tractor. The diameter of this
cleaner is 7 in. (178 mm) as compared to the 6.5 in. (165
mm) diameter cleaner previously used on the Ford 4000.
The inlet and outlet ports are 2. 25 in. (57 .15 mm) diameter
as compared to the 2 in. (50.8 mm) diameter ports in the
previous cleaner. The air cleaner hoses have been changed
accordingly.
Part 2
FUEL SYSTEMS-GAS
FORD
5000
(GAS) - AIR CLEANER
A new air cleaner is used with the new model Ford 5000
gas engine. This cleaner has a diameter of 7 in. (178 mm)
compared to the 6.5 in. (165 mm) diameter cleaner used
on the previous Ford 5000 gas tractor. It has an inlet
,,ort diameter of 2.25 in-. (57.15 mm) as compared to the
2.0 in. ( 50.8 mm) diameter inlet port in the previous
cleaner used on Ford 5000 gas tractors.
ALL Gi\S ENGINES -
NO LOAD AND IDLE SPEEDS
The following no load and idle speeds are specified
for new model gasoline engines.
Model
Ford 2000
Ford 3000
Ford 4000
Ford 5000
No Load Speed
2065-2165
2285-2385
2395-2495
2285-2385
Idle Speed
600-700
600-700
600-700
600-700
9/68 ©
FORD MOTOR COMPANY -1968 PAGE 7