Page 2
Please keep this instruction manual for future reference and for the – All warnings on the Pre-Amp and in the duration of owning this Friedman Pre-Amp. Please carefully read and operating instructions should be adhered to. understand the instructions inside this user’s manual before attempting 4.
Page 3
11. Damage Requiring Service NOTE: This equipment has been tested and found to comply with the – The Pre-Amp should be serviced by qualified service personnel when: limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against A.
Page 4
2) The IR-X can also be used as a full featured guitar preamp by The IR-X was primarily designed as a direct recording and live solu- connecting it into the effects loop return of an amplifi er head tion, with that Friedman tone you have become accustomed to.
Page 5
– simply connect any PREAMP into the RETURN of the IR-X. effects loop return and feel the IR-X’s fi re breathing capabilities. The IR-X can go from blues to classic rock and heavy rock to metal by simply adjusting the gain controls.
• CHANNEL 2 FOOTSWITCH: Short press: Activates CHANNEL 2, Long press: BYPASS FX LOOP. • BOOST V.: This is the IR-X MASTER VOLUME when BOOST • BOOST FOOTSWITCH: Short press - Activates BOOST. is engaged. The more you turn it up the louder it gets.
• SEND JACK: IR-X DRY Preamp only output. This is where you will be no connection to your house earth and your guitar will likely plug the INPUT of your Effect(s) or the output of the IR-X to be pickup more noise (HUM) depending on your environment.
Page 8
CHANGE using your preferred MIDI controller, adjust the setting rock era. This 1984B “Bass” cabinet is loaded with British on the IR-X and long press the BOOST foot switch to store it to the Greenback in the top and V30’s in the bottom. This blend of selected MIDI PC.
FIRMWARE UPDATES • DFRIED V30 The Friedman 4x12 is a closed back cab with Baltic birch, tongue and groove construction. It’s a perfect balance of IR-X Software will automatically checks for device tight bottom and, big midrange, and a balanced top end.
Page 10
• STORE button will store all the changes made to all presets inside the unit. MAKE SURE TO STORE ANY CHANGE before powering down IR-X. • PRESENCE (PER CHANNEL) is a 3-way toggle selector to program the amount of presence for the power amp simulation in the DI output.
Page 11
Friedman stands behind our products like no other and we’re here to help you! • The Return Authorization Number must appear in large print directly below the shipping address.
Page 12
www.FriedmanAmplification.com Printed in USA...
Need help?
Do you have a question about the IR-X and is the answer not in the manual?
Questions and answers