Page 2
• Single button footswitch • 5-Year Limited warranty The Runt-20 offers two channels – a simple, yet pristine clean that is controlled with a single Runt-50 Features: responsive knob and bright switch. The classic •...
Page 3
If you have any questions or require help don’t hesitate to email us at friedmanamps@gmail.com...
Page 4
4. Follow Instructions – All operating and use Friedman Amplifier. Please carefully read and instructions should be followed. understand the instructions inside this user’s 5. Water and Moisture – The amplifier should not manual before attempting to operate your new be used near water –...
Page 5
12. Cleaning – The amplifier should be cleaned only with a cart, stand, tripod, bracket, or table only as recommended by the manufacturer. Clean recommended by the manufacturer, or sold with by wiping with a cloth slightly damp with water. the product.
Page 6
SPEAKER OUT JACKS (2): Plug your speaker cabs in here. If using only one cabinet, connect to “USE FIRST” jack. The Runt-20 has a built in dummy load in case you want to use the XLR output without having a speaker connected.
Page 7
HT FUSE: Only replace with designated fuse value, appropriate to the voltage in your country. If this blows, don’t freak out too much. It’s most likely a bad power tube. We recommend you carry a few spare fuses and a spare set of tubes when gigging.
Page 8
SPEAKER OUT JACKS (2): Plug your speaker cabs in here. If using only one cabinet, connect to “USE FIRST” jack. The Runt-20 has a built in dummy load in case you want to use the XLR output without having a speaker connected.
Page 9
Return consequential damages arising out of the use or Authorization Number must be obtained inability to use of any Friedman product, even if a from our Customer Service Department Friedman dealer has been advised of the prior to shipping the product.
Need help?
Do you have a question about the Runt-20 and is the answer not in the manual?
Questions and answers