Advertisement
Note: These instructions are only applicable if the Universal Adapters are included in the accessories
pack of the filter pump packaging.
1. If the suction fitting and return fitting of your pool are the plunger valve type (as shown in diagram below), you can use the Universal Adapters to fit the
plunger valves with the hoses that come with the Polygroup
Gasket
Universal Adapter
O-ring for 1.5" hose
O-ring for 1.25" hose
2. Installation Procedure:
1) Take out the Filter Pump Assembly, two Hoses, four Hose Clamps and
two Universal Adapters.
* Filter pump image for reference only
3) Connect the 1.25" or 1.5" hose to the adapter, then tighten the hose
clamp.
Replacement parts ordering info
Key #
1
2
Use of the Universal Adapter
filter pump. Follow the installation procedure below:
®
Description
Universal Adapter x 1
OWNER'S MANUAL
2) Attach one Universal Adapter to each plunger valve of the pool
respectively.
4) Connect another hose to the other adapter, then tighten the hose
clamp.
PART #
P58003689W05
Advertisement
