Advertisement
Set Timer
The automatic timer settings range from
1 minute to 99 minutes. (NOTE: There
is no "seconds" and "hours" display, only
minutes). The red dot next to the Time
symbol indicator will illuminate indicating
that the cooking elements is selected.
While cooking, touch the Timer key pad
until time light of the desired cooking
element is ON, Time digital display reads
"00" and blinking; Touch "+" or "-" key to
set the desired number. Once the Timer
is set and no "+" or "-" keys are pressed
for 5 seconds, the Minute Timer begins
the countdown and the timer display will
stop blinking and will stay on in the
display. Once the Minute Timer reaches
"00", a "beep" will sound, indicating that
the time is up, the Particular Cooking
Element will automatically shut off.
If you want to set another burner to switch
off automatically, touch Timer key until the
desired time symbol indicator blinks,
repeat the same steps above.
QUADRUPLE BURNER INDUCTION COOKTOP MANUAL
III. Using The Cooktop
If you want to check the remaining time for
another Cooking Element, touch the Timer
key until the time symbol indicator for the
desired Cooking Element blinks.
If more than one switch off time is
programmed, the shortest time remaining
will show in the Time digital display, the
indicator for that particular burner will be
blinking.
Cancel Timer
Touch the Timer key until the Time symbol
indicator for the desired Cooking Elements
blinks, then touch the "+" or "-" to set the
timer to 00. The Time digital display will
blink for 5 seconds and then turn off,
indicating that the timer of selected cooking
element has been cancelled.
P.10
Advertisement
