Table of Contents
Advertisement
MCD104-A0U-ACHLLLK_ENG
12/4/09
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a mode in which you want to
record.
3. Play back a sound source first.
4. Start the recording
"REC" is displayed.
5. To stop recording, press
Recording to USB - More you can do
Recording Music file in disc source to USB
One track recording -
If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
Program list recording -
USB records after creating your own program if you want to record the track
you want. (Audio CD only)
To set recording bit rate and speed
1 Press R (USB REC.) on the player or z z REC on the remote control for
longer than 3 seconds.
2 Use . bb/BB > on the player or . bb/BB > on the remote
control to select the bit rate among 96/128/192/256 Kbps. You can set the
quality of the recorded file.
3 Press R (USB REC.) or z z REC again to select the recording speed.
4 Use . bb/BB > or . bb/BB > to select a desired recording
speed.
X 1 SPEED
- You can listen to music while recording it. (Audio CD only)
X 2 SPEED
- You can just recording the music file.
10
11:17 AM
Page 10
ON UNIT
ON REMOTE
-
-
FUNCTION
(CD,TUNER, ...)
B B / []
B B
R ( USB REC.)
z REC
x x STOP
x x
5 Press R (USB REC.) or z z REC to finish the setting.
NOTES:
On radio, AUX or Tape mode, you cannot set the recording speed.
Pausing recording
During recording, press R (USB REC.) or z z REC to pause recording.
Press R (USB REC.) or z z REC to continue recording.
(Only Radio/ AUX/ TAPE)
When you are recording, look out for the following
• You can check the recording percentage rate for the USB record on the
screen during the recording. (MP3/ WMA CD only)
• During recording MP3/ WMA, there is no sound.
• When you stop recording, the file that has been recorded at that time will
be stored. (Audio CD only)
• Do not remove the USB device or turn off the unit during USB recording. If
not, an incomplete file may be made and not deleted on PC.
• If USB recording does not work, the message like "NO USB", "ERROR",
"USB FULL" or "NO MORE" is displayed on the display window.
• A file is recorded by 512Mbyte when you record for a long term.
• When you stop recording during playback, the file will not be stored.
• You may not record more than 999 files.
• It'll be stored as follows.
AUDIO CD
MP3/ WMA
The other sources
Advertisement
Table of Contents
