Advertisement
SKU RC-07
Programming Instructions
Before you program your ExcelTek remote please be advised of the followings:
• More than 1 garage door to program
Be sure to know which garage door you're planning programming on which button
before you start because once programmed you won't be able to change it unless
you erase all frequencies previously programmed with your garage door opener.
For example, you have the ExcelTek remote button A programmed with garage door
#1 and button B programmed with garage door #2 and you changed your mind. You
now want to do the opposite. When you're gonna have the garage door #2
programmed on button A or garage door #1 programmed on button B both garage
doors A and B will open at the same time.
• Up to 3 frequencies can be programmed
For model RC-07, button C and D are linked together making the remote three
buttons.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ExcelTek RC-07
Summary of Contents for ExcelTek RC-07
- Page 1 A or garage door #1 programmed on button B both garage doors A and B will open at the same time. • Up to 3 frequencies can be programmed For model RC-07, button C and D are linked together making the remote three buttons.
- Page 2 Programming Instructions 1. Locate the Learn button 2. Press and immediately release the learn button. The learn LED will glow steadily for 30 seconds. Within 30 seconds… 3. Press and hold the button on the remote control that you wish to use. Release the button when the garage door opener lights blink or two clicks are heard.
- Page 3 GREEN in color. If it’s a different color the ExcelTek remote model RC-07 is not suitable for your device and you will have to return it since you ordered the wrong item. Please check out our listings for remotes compatible with other learn buttons colors.
- Page 4 Troubleshooting Guide ❖ My remote is not synchronizing with my garage door opener. o Please check the voltage of your remote battery because it might be low. We try to do our best to provide top quality products, but sometimes low voltage batteries slip through our quality controls. If you received a defective battery, please contact immediately so we can solve the problem in a timely manner.
- Page 5 HOW TO REPLACE THE BATTERY ❖ You will need a micro 50mm Philips screwdriver to remove the back panel. Battery type is 27A 12V (Available on Amazon)
- Page 6 ❖ Please note button C and D are linked together. ❖ Dip switches are NOT compatible with model RC-07. ❖ If you have any concerns while programming our ExcelTek remote feel free to contact us to get assistance. If you feel unhappy about our products in any...
Need help?
Do you have a question about the RC-07 and is the answer not in the manual?
Questions and answers