Status Leds - HID Mercury MR16out-S3 Installations And Specifications

Powering
Trusted Identities

2.6 Status LEDs

2.6.1 Power-up
All LEDs are OFF.
2.6.2 Initialization
Once power is applied, initialization of the module begins.
When initialization is completed, LEDs A, B, CT, and BA are briefly sequenced ON then OFF.
2.6.3 Run time
After the above sequence, the LEDs have the following meanings:
LED Description
A LED Off-line:
On-line:
A LED Error indication: Waiting for application firmware to be downloaded: .1 sec ON, .1 sec OFF
B LED SIO communication port status:
Indicates communication activity on the SIO communication port.
CT Cabinet tamper
BA Power fault
LED 1 through 16 Illuminates when output relay OUT 1 (K1), OUT 2 (K2) is energized and so on.
PLT-05251, A.2
1 sec rate, 20% ON
Non-encrypted communication: 1 sec rate, 80% ON
Encrypted communication: .1 sec ON, .1 sec OFF, .1 sec ON, .1 sec OFF, .1 sec ON, .1 sec OFF, .1 sec
ON, .3 sec OFF
10
HID® Mercury™ MR16out-S3 Processor
Installation and Specifications
August 2022