Table of Contents
Advertisement
Available languages
Available languages
ACOUSTIC PRESSURE MAT TMF01
User Manual
Proper Use
The wireless acoustic pressure mat consists of a pressure mat containing a sensor foil and a wireless
transmitter, and an alarm unit including a wireless receiver. If the mat is pressed down, it will trigger an
optical and acoustic signal at the alarm unit.
The wireless transmitter and receiver are already coded and marked with a corresoponding channel
number (CH-Nr).
The wireless transmitter is powered by a CR2032 lithium battery; the alarm unit is powered by 3 x 1,5 V
type C batteries or by a suitable 6 V power supply.
Always observe all the safety instructions. If you have any questions or are unsure about using the
equipment, ask a specialist or obtain information online at www.indexa.de. Keep this manual in a safe
place and pass it on to third parties if necessary.
Typical areas of application are listed below. Any other use or modification of the equipment is not
authorised and presents significant risks of accident. No liability will be accepted for consequential
damages or for damages caused by improper use or incorrect operation.
This equipment is not suitable for use by persons (including children) with limited physical, sensory, or
mental abilities or with lacking experience or lacking knowledge unless they are supervised by a person
responsible for their safety or obtain instructions on how to use the equipment. Children must be
supervised to make sure they do not play with the equipment.
Areas of Application
As an alarm or visitor chime
Protects your entry effectively and discretely. Simply place the mat under a carpet or doormat. You can
choose between a loud alarm siren or a chime.
Can be used in care/childcare
The doormat alerts you when the resident or your child leaves the bed or room. This allows you to intervene
quickly and prevent falls, disorientation and other dangers.
As a "Cat Doorbell"
Instead of having to keep checking if your cat has finally come home: when your cat sits on the mat in front
of the closed door (e.g. front door, back door or patio door), you will hear the door chime inside the house.
Simply place the mat under a doormat (or a towel) in front of the door and the alarm unit inside the house.
!
The chime sounds inside, the cat will not be disturbed by the noise.
!
Ideal for virtually all entrance doorways. However do not expose themat to rain or water.
Place the mat under a soft doormat or a towel (
Safety Instructions
Read this users manual carefully before installing or using your acoustic pressure mat. Check the
pressure mat alarm for damage. Do not operate a damaged unit!
!
Only use the acoustic pressure mat alarm in dry locations indoors or in a protected location outdoors.
Do not expose the unit to rain or water.
!
Leaking or damaged batteries can cause damage to your skin when touching them. In this case, use
appropriate safety gloves.
!
If the unit is not used for a longer period of time, remove the battery from the battery compartment.
!
Before drilling holes, check the wall for concealed electric cables.
!
Do not let children play with the units. Make sure that children do not take individual parts into their
mouth.
Contents
!
pressure mat including wireless transmitter
!
CR2032 lithium battery for wireless transmitter
!
alarm unit
!
2 screws and 2 wallplugs
Also required:
!
3 x type C batteries LR1400, MN1400; alternatively: 6 V power supply, min. 200 mA (e.g. NG600U,
art.no. 32108)
!
1 x carpet, doormat or towel for covering the pressure mat
not supplied
) that your cat likes to sit on.
Description
1
2 3 2
4
5
1 alarm unit
2 LED: triggering
3 LED: battery warning
4 sounder
5 chime volume control
6 power supply connection
Technical Data
Pressure mat TMF01T
Sensor:
contact foil
Operating voltage:
3 V
Current consumption:
4 A (standby); 5 mA (activation)
Battery:
CR2032 (lithium)
Material:
synthetic, black
Dimensions:
560 x 360 mm
Operating temperature:
-5° C to +40° C
Alarm unit TMF01S
Operating voltage:
3,7 - 5 V
Current consumption:
0,5 mA (standby); 120 mA (activation)
Battery:
3 x 1,5 V type C/LR1400 (alkaline)
Power supply:
6 V, min. 200 mA
plug: 2,1/5,5 mm, 12 mm length, positive internal pole
Loudness:
alarm: approx. 95 dB (A) loud
chime: approx. 90 dB (A) quiet
chime: approx. 60 dB (A)
Material:
synthetic, white
Dimensions:
94 x 130 x 42 mm
Operating temperature:
0° C to +40° C
Radio characteristics
Frequency band:
433,05 MHz - 434,79 MHz
Maximum radiated transmission power: < 10 mW
Radio range:
max. 60 m (in open field)
Radio coding:
transmitter TMF01T and receiver TMF01S are encoded with
each other ex works (corresponding CH No.)
Inserting the Battery into the Pressure Mat
!
Open the Velcro fastener located at the side of the
pressure mat and take out the transmitter [10].
!
Open the
transmitter
battery compartment [12] with a
screwdriver (see fig. 1).
!
Insert the
CR2032 lithium battery supplied with the
labeled side (+) facing up into the battery compartment
(see fig. 2) and close the battery compartment.
!
Test the function of the transmitter: When pressing the
pressure mat, the LED [11] should light up.
!
Insert the transmitter
into the pressure mat, and
Velcro fastener.
9
9
6
POWER
7
0
8
7 signal setting
8 alarm unit battery compartment
9 suspension
10 wireless transmitter
11 LED: triggering (on other side)
12 transmitter battery compartment
"
F
"
fig. 1
close
the
fig. 2
10
11
12
Advertisement
Table of Contents
