Table of Contents
Advertisement
PureSpa™
SB-H10
110-120 V~, 60 Hz, 12 A
For illustrative purposes only.
Do not forget to try these other fi ne Intex products: pools, pool
accessories, in-home toys, airbeds and boats available at fi ne
retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves
the right to change specifi cations and appearance, which may
result in updates to the instruction manual without notice.
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, visit
www.intexcorp.com
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
1-800-234-6839
Monday through Friday, 8:30am to 5:00pm Pacifi c Time
(347PO) SPA ENGLISH 7.5" X 10.3" PANTONE 295U 07/11/2019
IMPORTANT
SAFETY RULES
Please read, understand, and follow all
instructions carefully before installing
and using this product. Keep for future
reference.
IMPORTANT!
347
English
PO
347-*PO-R0-2007
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PureSpa 28427E and is the answer not in the manual?
Questions and answers
water not heating to set temperature
The Intex 28427E water may not be heating to the set temperature due to the following reasons:
1. The ambient temperature is lower than 50ºF (10ºC), which slows heating.
2. Outdoor wind can reduce heating efficiency.
3. The heater may already be off if the water has reached the set temperature (indicated by a green flame icon).
4. If the water temperature is too low (below 41°F or 5°C), the system may not start heating until warm water is added.
5. If the water temperature is too high, the heating system will shut off (error code E95).
6. The filtration system may be running in rest mode, preventing active heating.
Check the display flame icon color and ambient conditions to identify the cause.
This answer is automatically generated
The control panel would connect to the app