Table of Contents
Advertisement
@& TU-G TONE UNIT (USA ONLY)
"Thick
TU-6 Installation
1) For the top cover removal, refer to the figure on page 15.
2) Peel the waxed sheet off the supplied cushion (A) and affix
the cushion on the mounting space indicated.
3) Peel the other side of the waxed sheet off the cushion and
secure the TU-6 unit on the cushion properly.
4) Solder TU-6 lead wires to the terminals as shown.
For soldering, use a pen type solder iron. At this time, be
careful not to apply excessive heat.
-
Solder points:
Brown lead
++
++
(TR)
Black lead 9 —+-+—~-—— (TP) TE
White lead
-—-——= mal (FP)
5) Peel the waxed sheet off the supplied cushion (B) and affix
the cushion on the TU-6 unit as shown.
:
:
6} Replace the top cover.
Fae
TU-6 Installation
20
aS 7 Sy
Adjusting screw
Advertisement
Table of Contents
