Table of Contents
Advertisement
2
MS (Odd split channel)
16
Procedure
Select the desired frequency
Pressing the [M] key causes the » M an-
nunciator to light, an audio tone to sound,
and
the
display
to
sequentially
display
channel
numbers
that currently
contain
data.
Frequency
'selec- } Main dial, MIC
tion
UP/DWN
Function selection
ia
Depress
the
key
corresponding
to
the
desired memory channel.
Memory
channel
selection
A morse code
''R'' will sound to indicate
that the channel has accepted the data.
If a channel is selected that allready con-
tains data, an error tone of 3 beeps will
sound. If you wish to rewrite the data that|
had been previously stored, press the cor-
responding
key again.
The
''R'' should
sound.
Procedure
Receive frequency | Main dial, Mic
selection
Select the desired receive frequency.
Pressing the [M] key causes the » M an-
| nunciator to light, an audio tone to sound
L_]
and
the
display
to
sequentially
display
channel numbers that currently have data
stored in them.
,
Press the M5 key.
A: single beep will sound, to indicate that
C5]
the recieve frequency has been accepted.
|
If the error signal appears,
3 beeps, and
you want to change the frequency that was
stored before press the M5 key again.
2 | Function selection
3°
|Memory
channel
selection
Main dial, Mic
|A series of 4 beeps will sound after the
UP/DWN
receive frequency has been entered (step
3). Select the desired transmit frequency.
Transmit frequen-
cy selection
Press the M5 key to store the transmit fre-
quency. A morse code ''R'' will sound to
signal data storage.
Transmit frequen-
cy entry
Advertisement
Table of Contents
