Exposure Adjustment Or Full-Manual Operation - Minolta SR-T 200 Owner's Manual

speed and aperture settings. If the follower
cannot be moved into alignment, one of
these settings must be adjusted to allow it.
It may be more usual to set the shutter-
speed first accord ing to the su bject move-
ment and effect desired, though the aper-
ture may of course be set first if appropriate
(see pp. 28-29).
3. After the needles are aligned , simply con-
firm focus (see p. 30) and composition and
release the shutter (p. 33) .
Exposure adjustment or full-manual operation
Aperture or shutter speed can if desired be
adjusted so as to give more or less exposure
than the meter indicates proper. With MD or
Me
lenses, each click stop on the aperture ring
represents a half-stop difference in exposure
(see p . 27), while moving the shutter-speed dial
from one cl ick-stop to another changes expo-
sure a full stop . With more exposure, the
follower will appear nearer the top of the
horizontal frame (see Illustration B at left);
with less, on the other side of the needle
toward the bottom (Illustration C). Needle
alignment may of course be completely dis-
regarded for full-manual exposure control.
25