Table of Contents
Advertisement
¢ BASIC OPERATIONS
LISTENING TO THE BROADCASTS
AUTO/MANUAL switch
TUNING switch
MEMORY switch
BAND
selector switch
STATION CALL switch
Auto tuning
The electronic tuning circuit inside the cassette deck receiver
will automatically search for the station.
1. Perform the preliminary operations on page 10.
NOTE:
Manual tuning
1, Perform the preliminary operations on page 10.
NOTE:
The TUNED indicator will not function for broadcasts received
over long distances or when signals are weak.
5. Adjust the volume with the VOLUME control and the tone
with the GRAPHIC EQUALIZER controls.
RX-1180, RX-1190
PRESETTING STATIONS
Presetting
1. Tune in desired station.
e
See the auto tuning section for information on recep-
tion using auto tuning.
e See the manual tuning section for information on recep-
tion using manual tuning.
2. Press the MEMORY
switch.
©
The display will flash (about 3 seconds).
MEMORY
[J
=o
FM
mi
3. Press the STATION
CALL switch.
D
STATION CALL
Press once
switch number
Frequency
display
Mode 2 stations are preset by pressing the STATION CALL
switch twice within about 2 seconds.
p
STATION CALL
Press twice
switch number
e
After you press the STATION CALL switch, the display will
flash for about 2 seconds, then the station will be memo-
rized. If you press another switch (except the FM Mono and
auto-manual switch) while the display is flashing, the sta-
tion will not be memorized.
Pressing the STATION CALL switch twice within about 2
seconds switches alternately between Mode 1 and Mode
2.
Mode 1—————— » Mode 2
(1~ 12)
_ Press twice
(13 ~ 24)
within about 2 sec.
a
Advertisement
Table of Contents
