Advertisement
The GigRig Ltd
Unit 15 Whitehill Industrial Pk, Whitehill Lane
Royal Wootton Bassett, Wiltshire. UK
SN4 7DB
MIDI
The Remotest Loopy2 enables you to control its loops using both PC and CC MIDI messages.
* Set your desired MIDI input channel using the channel select rotary encoder. 1= channel 1, 2= channel 2, etc. A=
channel 10, B= channel 11, C= channel 12, D= channel 13, E= channel 14, F= channel 15, 0= channel 16
* Send the Remotest Loopy2 the desired MIDI message
Program Control Messages (PC)
PCM 1 = Loop 1 ON, Loop 2 OFF
PCM 2 = Loop 1 OFF, Loop 2 ON
PCM 3 = Loop 1 ON, Loop 2 ON
PCM 4 = Loop 1 OFF, Loop 2 OFF
Continuous Control Messages (CC)
CC Number 80 - Loop 1
Value 0~64 = ON, 65~127 = OFF
CC Number 81 - Loop 2
Value 0~64 = ON, 65~127 = OFF
SETUP EXAMPLES
The Remotest Loopy2 can be set up in MONO or STEREO or a combination of either.
Set Up Example 1 – MONO Connections
ST/M Switch setting for a standard MONO set-up is ST. The ST/M switch only applies when you are using a MONO
input with TRS cables in the effect loops.
THEGIGRIG REMOTEST LOOPY2 MANUAL
2
Advertisement
