Advertisement
The GigRig Ltd
Unit 15 Whitehill Industrial Pk, Whitehill Lane
Royal Wootton Bassett, Wiltshire. UK
SN4 7DB
TheGigRig Remotest Loopy2 enables you to add two extra effects loops to your pedal board and switch them in and out
using either a simple TRS remote switch (such as the Remote Switches in G3) or control the loops using MIDI. Best of
all, you can use the Remotest Loopy 2 in mono or stereo using TRS leads and it includes a switchable post effects-loop
mono/stereo buffer.
Remotest Loopy2 Connections
INPUT:
The main signal input. For stereo signals from the input use a TRS cable
LOOP1 SEND:
Sends the mono/stereo signal to the input of your effect
LOOP1 RETURN:
Connect the output of the effects that you want in LOOP1 here
LOOP2 SEND:
Sends the mono/stereo signal to the input of your effect
LOOP2 RETURN:
Connect the output of the effects that you want in LOOP2 here
OUTPUT:
The main output signal
BUFFER:
This switch turns on a stereo buffer post effects loops. Left – ON, Right - OFF
REMOTE IN:
You can remotely switch the Remotest Loopy2's loops by using any dual latching switch including G3's
remote switches. This is a TRS connection
POWER:
9V Centre Neg 2.1 mm connection @ 150mA
M/ST:
This switch selects the input state when using TRS loops. ST is the standard configuration for using all MONO
loops or all STEREO loops.
INPUT/LOOPS:
If you have a mono input but want to use stereo TRS loops select the M state
CHANNEL:
Selects the MIDI input channel from 1 to 16
MIDI IN:
Receives MIDI signal via standard 5 pin din
MIDI OUT:
Reflects the MIDI IN signal directly through
In Operation
The Remotest Loopy2 has 2 passive effects loops in series that can be either MONO or STEREO. You can place the
Remotest Loopy2 anywhere in your rig where you want to add 2 extra loops. For example, place it at the start of your
pedal board to add two mono loops at the front, or place it right at the end of your signal path to have two extra loops
after everything else. You can switch the loops using either a simple TRS remote switch or with MIDI using either PC or
CC messages. The switchable stereo buffer sits after the effects loops so you can keep the loop signals passive which
works great for fuzzes effects that have a sensitive input. Now you can choose if you want the signal post loops to be
buffered or not. This is a true stereo buffer so if you are using stereo effects, you have a separate buffer for you left and
right signals.
THEGIGRIG REMOTEST LOOPY2 MANUAL
TheGigRig Remotest Loopy2
1
Advertisement
