NightSearcher TwinStar Connect User Manual

Download this manual

3 Optional adaptors available:

Accepts 18-21V batteries: Metabo, Festool and Hilti

(Battery not included)

NS Code: SPWORKSTAR-AD

Changing the battery adapters:

1) Check which of the 4 adaptors matches your battery pack

2) To change the adaptor, simply undo the screw and remove the adaptor.

Push

4) Replace with the correct adaptor and re-screw back onto the lamp.

TwinStar Connect User Manual

Supplied with:

4 power tool battery adaptors

and tripod

18-21V

Push

3) Push here on both sides and

pull off the adaptor.

5) Slide the battery cartridge into

adaptors making sure the battery

pack is fully seated.

Features:

180° Swivel

Carry Handle

Operation:

There are two independent power switches,

to control each light head.

Power / Light Mode Switch

1: On - High power

2: On - Medium power

360° Rotational

light head

3: On - Low power

4: Power off

Need help?

Do you have a question about the TwinStar Connect and is the answer not in the manual?

Page 1 TwinStar Connect User Manual 360° Rotational light head Features: 180° Swivel Supplied with: Carry Handle 4 power tool battery adaptors and tripod 3 Optional adaptors available: Accepts 18-21V batteries: Metabo, Festool and Hilti (Battery not included) NS Code: SPWORKSTAR-AD Changing the battery adapters:...
Page 2 Recycle where facilities exist. Check with your local authority for recycling advice. Alternatively, NightSearcher is happy to take receipt of this product at end-of-life and will recycle it on your behalf. All NightSearcher products have a 3-year standard warranty on all manufacturing defect from the date of purchase.