LL
Specifications
TV system:
B/G/H, D/K
Colour system:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
VHF:
E2-E12
UHF:
E21-E69
CATV:
— $1-S20
HYPER:
$21-S41
D/K:
R1-R12, R21-R69
Picture Tube:
Flat Display FD Trinitron
KF-25FX30K: 25" (approx. 63 cm.
measured diagonally)
KF-29FX30K; 29" (approx. 73 cm.
measured diagonally)
Rear Terminals
(1/3
21-pin scart connector
(CENELEC standard)
including audio/video
input, RGB input, TV
audio/video output.
G2/-89
21-pin Scart connector
(SMARTLINK)
| (CENELEC standard)
including audio / video
input, S video input,
selectable audio / video
output and Smartlink
interface.
oe
audio outputs (Left/
Right) - phono jacks
Front Terminals
~€33 S Video input - 4 pin DIN
-233 video input ~ phono jack
© 3 audio input — phono jacks
headphones jack
Sound Output:
2x 14 W (music power)
2x 7 W (RMS)
Power Consumption:
KF-25FX30K: 87 W
KF-29FX30K: 94 W
Standby Power Consumption:
0.5 W
Dimensions (w x h x d):
KF-25FX30K: Approx. 655 x 509 x 476 mm.
KF-29FX30K: Approx. 746 x 589 x 516 mm.
Weight:
KF-25FX30K: Approx. 36 Kg.
KF-29FX30K: Approx. 46.5 Kg.
Accessories supplied:
1 Remote Control (RM-887)
2 Batteries (IEC designated)
Other features:
* Teletext, Fastext, TOPtext
* Sleep Timer
* Smartlink (direct link between your TV set
and a compatible VCR. For more
information on Smartlink, please refer to
the Instruction Manual of your VCR).
* TV system Autodetection.
Design and specifications are subject to change without notice.
Ecological Paper- Totally Chlorine Free
&
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Problem
Solution
No picture (screen is dark) and no
¢ Check the aerial connection.
sound.
* Plug the TV in and press the @ button on the front of
TV,
* If the standby indicator © is on, press I button on
the remote control.
Poor or no picture (screen is dark),
¢ Using the menu system, select the "Picture
but good sound.
Adjustment" menu and select "Reset" to return to the
factory settings.
No picture or no menu information
— * Check that the optional equipment is on and press the
from equipment connected to the
-) button repeatedly on the remote control until the
Scart connector.
correct input symbol is displayed on the screen.
¢ Press the <4 +/- button on the remote control.
* Check that "TV Speakers" is "On" on the "Sound
Adjustment" menu.
Good picture, no sound.
No colour on colour programmes.
* Using the menu system, select the "Picture
Adjustment" menu and select "Reset" to return to
factory settings.
Distorted picture when changing
* Turn off any equipment connected to the Scart
programmes or selecting teletext.
connector on the rear of the TV.
Wrong characters appear when
* Using the menu system, enter to the "Language/
viewing teletext.
Country" menu and select the country in which you
operate the TV set.
Picture slanted
¢ Using the menu system, select the "Picture Rotation"
option in the "Detail Set Up" menu to correct the
picture slant.
Noisy picture when viewing a TV
* Using the menu system, select the "Manual
channel.
Programme Preset" menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
« Using the menu system, select the "Noise Reduction"
option in the "Detail Set Up" menu and select
"On" to reduce the noise in the picture.
No unscrambling whilst viewing a
* Using the menu system, select the "Set Up" menu.
scrambling channel with a decoder
Then enter to "Detail Set Up" option and set "AV2
connected through
the Scart
Output" to "TV".
connector (>2/-€9.
Remote control does not function.
* Replace the batteries.
The standby indicator © on the TV
* Contact to your nearest Sony service centre.
flashes.
In case of problems, have your TV serviced by qualified personnel. Never open the
casing yourself.