Advertisement
TURNTABLE FACILITIES
[
i
|
| NOTE:
Hustration shows PL-223Z.
PL-203AZ and PL-223AZ are not equipped with dust cover.
1
@ EP adaptor
Place over the spindle to play 45 rpm singles.
@ Platter spindle
@ Platter mat
@ Platter
© SPEED switch
Set this switch in accordance with the speed of the record.
33 : For 33-1/3 rpm records. 45 : For 45 rpm records.
© ARM ELEVATION
switch
e Use the switch for manuai play.
¢ Use the switch to suspend record play temporarily.
° Use the switch when changing the tracks during actual play.
[UP} :
The tonearm rises (the stylus moves away from the
record).
{DOWN} : The tonearm descends
{the stylus is lowered onto
the record).
@ STOP switch
Press this switch for stopping play.
® Cartridge
© Tonearm
© Arm rest
@ Dust cover (PL-223Z)
PRECAUTION
If the turntable is mounted directly on or against a speaker, the
vibration from the speaker will be transported to the tonearm's
cartridge, thus causing feedback howling. Be sure that speakers
are mounted sufficiently separated from the turntable.
GRAPHIC EQUALIZER CONTROLS
The tone for the left (L) and right (R) audio channels can be
adjusted separately with this graphic equalizer. The advantage of
the GRAPHIC EQUALIZER over conventional tone controls is that
the five controls of the GRAPHIC EQUALIZER make it possible to
control five different narrow.
With conventional tone controls a
setting for a bass or treble baost or cut will also affect the lower
or upper. mid frequencies.
Tie irequency bands controlled by the
five slide controls
have
been
chosen
to yield the maximum
possible control action within the audio spectrum.
100 Hz: The 100 Hz contro! is very useful for enhancing iow
bass notes as in organ music.
330 Hz:
The 330 Hz control will allow you to vary the upper
bass frequencies.
The 1 kHz control is the presence contro! and can be
used very effectively to emphasize,
or de-emphasize
vocalists.
1 kh:
PRELIMINARY OPERATIONS
3.3 kHz: The 3.3 kHz control
will add brilliance and clarity to
brass instruments and violins.
10 kHz:
The 10 kHz control can be used to make up for missing
high frequencies absorbed by the environment and to
add a natural crispness to music.
fi
&
U
v
WOOHz
330Hz
ikHz
3.3kHz
10kHz
Emphasize
frequency
range
De-emphasize
frequency
range
NOTE:
The
GRAPHIC
EQUALIZER
controls
function
in the modes
playback and recording.
The GRAPHIC EQUALIZER controls do
not function when recording from Deck | to Deck ff (including
tape copying).
© PERFORM
THE FOLLOWING
PROCEDURES
BEFORE
STARTING
ANY
OF
THE
OPERATIONS.
=
|
:
Co)
1. Press the POWER switch to ON.
2. Select the SPEAKERS switch.
3. Select the FUNCTION switches before operating
any of the equipment.
To listen to a compact disc : [CD]
& To listen to a record : [PHONO]
8 To listen to an FM or AM broadcast : [TUNER]
@ To listen to a cassette tape : [TAPE]
2 To listen to equipment
connected
to the VIDEO/AUX
jacks: [VIDEO/AUX]
When
a FUNCTION
switch
is pressed,
the corresponding
indicator lights.
44
<ARB1246>
Advertisement
