Advertisement
Reinforcement tips
1. Be sure to rotate in the direction indicated by the vertical arrow in the red part until the horizontal arrow
in the red part is aligned with the main pole card slot;
2. Align the entire lock buckle with the main bar slot and push it in to reinforce the horizontal bar;
3. After xing, rotate the main rod in the opposite direction of the arrow.
If it cannot be rotated, it is really xed;
4. When disassembling, push the buckle out of the slot before disassembling.
Step 3:
After the horizontal bar is xed, close the locks at both ends to improve safety
Reinforcement Method: Stretch the red part inside the lock, rotate it in the direction of the vertical arrow,
align the horizontal arrow with the groove of the main pole, and then insert it forcefully (if you encounter
resistance, stretch the red part again.)
(Reminder: There will be a certain sound when the lock is inserted, which is normal)
Inserted laterally
Vertical rotation
Reminder: After we receive the horizontal bar, if the lock and the pole are tight and the big foot pole is
di cult to turn out, we must rst loosen the locks on both sides.
Solution: We can rst take out the horizontal bar from the package, hold the red part of the lock buckle in
one hand, hold the black part of the lock buckle in the other hand and pull it out; let it rotate in the opposite
direction of the vertical arrow, then release the lock buckle and turn it out Bigfoot.
www.SQUATZ.com
Stretch the red part
Gravity Enhancement Tips
1. When the horizontal bar receives more gravity, the buttons on both ends will
slide down, which is a normal phenomenon;
2. When the button slides down, the two sides of the horizontal bar will protrude
outward, forming a triangular structure. Increasing the supporting force of the
wall guarantees your safety.
www.SQUATZ.com
Advertisement
