Playing Back Audio Data; To Pause Playback - Toshiba MEG50AS Owner's Manual

Playing Back Audio Data

G Before starting
Insert the HDD Card onto which audio data has been transferred. (
G
For audio data transfer function, refer to the owner's manual for MOBILPHILE
G
Application Software.
Attach the supplied wired remote control to the headphones jack.
G
Attach the supplied headphones to the wired remote control.
G
For operation of the wired remote control, see "Using the Wired Remote Control".
G
( page 29)
Turn the player on. (
G
Press the PLAY/PAUSE button (
Audio data to be played back differs depending on the screen
displayed when the button is pressed.
With the NAVI screen displayed: Playback is started with audio
With the PLAY screen displayed: Playback is started from the

To Pause Playback

To pause playback, press the PLAY/PAUSE button (
( ) again to resume playback of the remaining data.
NOTES
It may take several seconds to resume playback after the PLAY/PAUSE button (
G
pressed.
If no operation is performed for approximately 3 minutes after playback is paused, the
G
power will be automatically turned off.
The NAVI screen appears when any of the below actions occur and MOBILPHILE
G
power is then turned on.
– The HDD Card is reinserted.
– The USB port is connected to a personal computer.
– The battery switch is shifted to "Stop" without the AC adapter connected.
Depending on audio data you may hear noise at very rare intervals.
G
page 22)
).
data detected first.
beginning of the audio data on the
display.
). Press the PLAY/PAUSE button
page 21)
) is
23