Table of Contents
Advertisement
User Manual
Typical Operation Sequence
Action
Plug in your glass washer
Switch On
Place glass over the brush
Switch Off
Unplug the unit
Protection Component
This glass washer includes a capacitor motor . To protect the electronic components inside, the
machine will shut off automatically if it begins to overheat .
Cleaning & Maintaining Your Glass Washer
To clean, first remove the power cord's plug from the wall outlet . Wait for the glass washer to cool
down . Use a damp cloth or sponge to gently wipe down the unit . Avoid soaking the whole unit into
water or washing it in running water as this will cause serious damage to the unit .
When closing for the day, drain sink and wipe off machine, let the machine dry overnight .
After use for a month, remove the base cover that protects the gears inside . Immerse the machine
in water, add 1/2 cup of vinegar . Operate the machine for 10 minutes, rinse thoroughly, and replace
the base cover .
Result
Power is connected, but unit will only start after the
machine is switched on
Unit starts to work; brushes start to spin
The glass is cleaned
Unit stops working
No power is connected
- 6 -
Advertisement
Table of Contents
