Advertisement
Quick Links
thermOweld
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - ROD TO ROD
RR-3
Place rods into mold as shown.
RR-6
Place rods into mold as shown.
RR-15
Place rods into mold as shown.
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
®
The Contractors Choice
RR-5
Place rods into mold as shown.
RR-14
Place rod into mold as shown. With RR-14 molds, rods
are uncut.
RR-16
Place rod into mold as shown.
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
ECN 2552 REV "J" 03/06/13
34-5657-11
Advertisement
Related Manuals for Burndy Continental Industries thermOweld RR-3
Summary of Contents for Burndy Continental Industries thermOweld RR-3
- Page 1 thermOweld ® The Contractors Choice INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - ROD TO ROD RR-5 RR-3 Place rods into mold as shown. Place rods into mold as shown. RR-6 RR-14 Place rods into mold as shown. Place rod into mold as shown. With RR-14 molds, rods are uncut.
- Page 2 GENERAL SAFETY INSTRUCTIONS WELDING PROCEDURE 1. Check mold tag for material to be welded and proper cartridge 1. Always wear proper clothing, safety glasses and gloves when size to use. exothermic welding. 2. Make sure all surfaces and conductors are clean, dry and are 2.
Need help?
Do you have a question about the Continental Industries thermOweld RR-3 and is the answer not in the manual?
Questions and answers