Dell NOT22108 Owner's Manual page 93

Table 29. System setup options—Integrated Devices menu (continued)
Integrated Devices
Date
Time
Memory Mapped I/O above 4 Gig
Camera
Enable Camera
Audio
Enable Audio
Enable Microphone
Enable Internal Speaker
USB Configuration
Enable External USB Ports
Enable USB Boot Support
Table 30. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
92 BIOS setup
Sets the computer date in MM/DD/YYYY format. Changes to the date take
effect immediately.
Sets the computer time in HH/MM/SS 24-hour format. You can switch
between 12-hour and 24-hour clock. Changes to the time take effect
immediately.
Enables or disables the Memory Mapped I/O above 4 GB.
Default: ON
Enables or disables the camera.
By default, Enable Camera is selected.
Enables or disables all integrated audio controller.
Default: ON
Enables or disables microphone.
By default, Enable Microphone is selected.
Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
Enables or disables external USB ports.
Default: ON
Enables or disables USB Boot Support.
Default: ON
Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID functions.
When enabled, all NVMe and SATA devices will be mapped under VMD
controller. Windows RST (Intel Rapid Restore Technology) driver, or Linux
kernel VMD driver must be loaded in order to boot the OS.
Enables or disables the onboard drives.
Default: ON
Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART).
Default: ON
Displays the information of various onboard drives.