Making Operational Readiness; Operation With Vicolux Smart Light Lighting Controller - Vision & Control SLE-150-IR850-P-SL Instructions For Use Manual

7.1 Making Operational Readiness

This device is intended for use with suitable controllers only. All technical
data and permissible conditions must be complied with.
The lighting is switched on by turning on the LED current I
The lighting is switched off by turning off the LED current I

7.2 Operation with vicolux smart light lighting controller

Damage caused by incorrect connecting and disconnecting
• The vicolux smart light lighting controller is not hot-plug capable.
• Connect or disconnect lights during operation may destroy the lights.
• Connect or disconnect lights only if the lighting controller is in the off and
deenergized state.
The light is switched on and controlled by the lighting controller.
For more information, please refer to the instructions for use of the respective
lighting controller.
© Vision & Control GmbH 2021
NOTICE
NOTICE
999.995.379.10-en-1.4
SLE-150-IR850-P-SL
Operation
.
LED
.
LED
25