Commissioning; Unpacking; Mounting The Device - Vision & Control SLE-150-IR850-P-SL Instructions For Use Manual

6 COMMISSIONING

Installation and connection operations may only be performed in the off and
de-energised state.

6.1 Unpacking

1. Lift the cardboard, together with the device, out of the carton.
2. Fold out the tucked in sides on the bottom of the cardboard. The film
loosens and forms an insertion pocket.
3. Remove the device out of the insertion pocket.
4. Dispose the packing material.

6.2 Mounting the Device

The following bores can be used for assembly.
Image 4: Mounting holes
6 x M3x0,5 tapped hole
1
maximum screwed-in depth: 4.5 mm
2 x Ø4.2 mounting hole (through bore)
2
© Vision & Control GmbH 2021
NOTICE
1 1
1
1
2
999.995.379.10-en-1.4
SLE-150-IR850-P-SL
Commissioning
1 1
2
21
1
1