Eco Sensor And Screen Brightness; Specifications And Other Information - Samsung QE55Q95TDTXXH User Manual

Eco Sensor and screen brightness

Eco Sensor adjusts the brightness of the TV automatically. This
feature measures the light in your room and optimises the
brightness of the TV automatically to reduce power consumption.
If you want to turn this off, go to
Solution > Ambient Light Detection.
• The eco sensor is located at the bottom of the TV. Do not
block the sensor with any object. This can decrease picture
brightness.
Changing the TV's password
> Settings > General > System Manager > Change PIN
Run Change PIN and then enter the current password in the
password field. The default password is "0000" (France: "1111").
Enter a new password and then enter it again to confirm it. The
password change is complete.
If you forgot your PIN code, press the buttons in the following
sequence to reset the PIN to "0000" (France: "1111"):
On the Samsung Smart Remote: Select
button. > Volume Up > > Volume Down >
Setting the sound sensor
You can turn on or off the sound sensor by using its button at the
bottom of the TV.
With the TV on, you can push the button to the left to turn on the
sound sensor or to the right to turn off it.
See the pop-up window on the TV to check whether the sound
sensor is turned on or off.
• During analysis using data from the sound sensor, the data is
not saved.
> Settings > General > Eco
(Volume)
> Volume Up > .
05 Specifications and Other
Information
Specifications
Display Resolution
3840 x 2160
Sound (Output)
Q95T* Series: 60 W
Q95TD Series: 50 W
Operating Temperature
10 °C to 40 °C (50 °F to 104 °F)
Operating Humidity
10 % to 80 %, non-condensing
Storage Temperature
-20 °C to 45 °C (-4 °F to 113 °F)
Storage Humidity
5 % to 95 %, non-condensing
Notes
• This device is a Class B digital apparatus.
• For information about the power supply, and more information
about power consumption, refer to the information on the
label attached to the product.
– On One Connect models, the label is attached to the
bottom of the One Connect.
– On most models, the label is attached to the back of the TV.
(On some models, the label is inside the cover terminal.)
• Typical power consumption is measured according to IEC
62087.
• To connect a LAN cable, use a CAT 7 (*STP type) cable for the
connection. (100/10 Mbps)
* Shielded Twisted Pair
• An administration fee may be charged in the following
situations:
(a) An engineer is called out at your request, but it is found
that the product has no defect (i.e., where the user manual has
not been read).
(b) You bring the unit to the Samsung service centre, but it
is found that the product has no defect (i.e., where the user
manual has not been read).
• You will be informed of the administration fee amount before
a technician visits.
English - 7