Advertisement
MULTI-BLADE FIRE DAMPERS
Nailor multi-blade fire dampers are tested by and listed with Underwriters Laboratories Inc. and are manufactured
within UL procedural requirements. Approved variables including a variety of options and accessories are
available to suit specific applications.
RETAINING ANGLES:
OPTION CODE QS1, QS2
'QUICK-SET' RETAINING ANGLES
The majority of installing contractors view fire damper installation as a costly time consuming and troublesome procedure.
Eight conventional angles must be custom fabricated for each damper either in a sheet metal shop or at the job site and
sized to suit each individual damper. Invariably, they are mislaid or lost and must be matched to each factory supplied
damper. The Nailor "Quick-Set" solution solves the majority of problems. They are pre-formed to fit each damper and
shipped with the individual damper units for ultimate convenience.
Option Code QS1 provides a single set of angles for applications requiring angles on one side of the damper only.
Option Code QS2 provides the complete kit of two sets of angles suitable for most applications that require angles on both
sides of the damper.
"Quick-Set" angles are supplied with correctly spaced pre-drilled screw-holes to ensure a quick, easy and accurate
installation for all Nailor fire dampers - no measuring required.
"Quick-Set" retaining angles when specified and supplied with Nailor integral sleeve fire dampers provide the "complete"
installation package. Simple, fast, convenient.
Previous View
Revised April 26, 2005
Options and Variables
FOR USE WITH MODEL SERIES 1200 AND 1250
• Maximum Size: 90" x 48" (2286 x 1219) or 48" x 90" (1219 x 2286)
Home
Contents
BENEFITS:
• Factory fabricated by the manufacturer to suit
the individual fire damper.
• Dampers can ship directly to the job site
complete with all necessary installation sheet
metal hardware (saves on double handling at
contractor's shop).
• Reduced cost when compared to conventional
retaining angles.
• Only two sets of angles to handle per damper
(rather than eight).
• Angles ship with individual damper - no
sorting or matching.
• Pre-drilled holes on 8" (203) centers to ensure
correct angle/sleeve attachment.
• Help ensure a correct installation as per U.L.
approved installation instructions.
Dimensions
Performance
Specification
E25
E25
E
Advertisement
