Kenwood TH-79A Instruction Manual page 58

If difficulty is experienced in these cases, press [MR] while still
holding [PTT] down to resend the code. Alternatively, release
[PTT] then press [PTT] again. Remember to switch ON the Page
function in advance.
+ When Page is ON, Scan cannot be used on the same band.
+ When Page is ON, choosing the VFO, the Call channel, or a
memory channel does not affect the Page status. Page remains
ON.
e When Page is switched ON while DTSS is ON, DTSS is switched
OFF automatically.
RECEIVING
The squelch must be closed {page 16} on both bands
before beginning this procedure.
1 Press [BAND] to select the Operating band and
select the prearranged frequency.
2 Press [F], [PAG] to switch ON the Page function.
+ "PAG" appears.
You are ready to receive a call addressed with your
Station code or a Group code. If no signal is received
for more than 2 seconds after a Page has opened the
squelch, the squelch then closes.
MA Receiving a Call with your Station Code
When a signal is received encoded with your
individual Station code, the squelch opens and you
hear an alert tone from the speaker. In addition, the
Display shows "PO" and the calling station's code.
52