Operating The Engine - Yanmar YM195 Operation Manual

26
Operating
the engine
(5-~ISTARTING THE ENGINE
Start
engine only from operator's rest. NEVER
s t a n
engine while standing on ground.
1) Open fuel shut-off valve.
IMPORTANT
2)
Place power shift lever and range shift lever
in neutral position b y depressing clutch
pedal.
3 1
Place PTO shift lever in neutral position t o
close start safety switch.
4) Turn off front PTO switch if
it
is equipped.
Push down the switch t o disengage the front
PTO.
5) Place hydraulic control lever in lower posi-
tion.
6) Push throttle lever t o the maximum speed
position.
Slow idk &on
As-won as engine starts, pull thmttle about
halfway back. Do not run
a
cold engine at full
throttle.
7) Turn key clockwise t o first position (ON).
Check indicator lamps. Both oil prenure
indicator and charging indicator should
glow. If they do not, consult your YAN-
MAR dealer.
Oil m r e i d i w
lam0
Before rtafiing
engine, be
sure there
k
plentv of
ventilation.