Charging Instructions This soldering is rechargeable. Using the supplied cable, insert the Micro USB con- nector into the end of the soldering iron, and the USB connector to a wall charger / computer port. A full charge will take approximately 3.5 hours. Once charged, the indicator light will turn green.
Soldering Instructions 1. Thoroughly clean and remove oil and other contaminants from the parts to be soldered. 2. Use only small amounts of solder. Excess solder can cause a short circuit. 3. Slide the soldering iron switch to the ON position and press and hold the power button.
Page 4
Adjust the direction of the tip 1. Rotate the black knurled nut to adjust the direction of the tip Knurled Nut Locking Nut LED Light WARNINGS • When used for soldering and similar applications, this product contains or produces chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Speci cations Weight 100 g Charging Time 3.5 Hours Running Time Soldering Iron: 35minutes Heat Shrink: 25minutes Max Temperature 600°C (1112°F) Charging Cable 100 cm USB to Micro-USB Learn more about soldering tools and components we have.