Sunricher ZG2801K2-5C Manual

RGB CCT DIM 3 in 1 Zigbee Remote Controller
Important: Read All Instructions Prior to Installation

Function introduction

ON/OFF button, click to turn
on/off the bind lighting devices
Brightness down button, press
and hold down to increase light
intensity, release and press
and hold down again to
decrease light intensity
The remote control can be fixed on the wall with 3M glue or screw.
10.10 mm
Battery: CR2430
Before the first use, please open the battery
cover and remove the protective film
09.ZGK4D.04837
CCT button, click to get 2700
Kelvin directly, press and hold
to increase cool white, release
and press and hold again to
increase warm white.
RGB color button, press and
hold down to get the color you
would like
Note: This remote supports
1 group for binding max. 30
lighting devices.
Front side
Back side
Product Data
Protocol
Input Voltage
Transmission Frequency
Transmission Range (free field)
Protection Type
Dimming Range
Dimensions
• ZigBee RGB+CCT+DIM remote based on ZigBee 3.0
• Enables to control both RGB and CCT lighting devices
• Battery powered remote with low power consumption
• Enables to pair ZigBee lighting devices via touchlink commissioning without coordinator
• Supports find and bind mode to pair with ZigBee lighting devices
• Supports 1 group for binding max. 30 lighting devices
• 2.4 GHz global operation
• Transmission range up to 30m
• Compatible with universal ZigBee Gateway products
• Enables to bind and control universal DIM, CCT, RGB, RGBW and RGB+CCT zigbee lighting devices
ZigBee Clusters Supported by This Remote Are As Follows:
Input clusters:
• Power Configuration • Identify
• Basic
Output clusters:
• Identify
• On/off • Level control
Safety & Warnings
• DO NOT install with power applied to the device.
• DO NOT expose the device to moisture.

Operation

1.This ZigBee RGB+CCT remote is a wireless transmitter that communicates with a variety of ZigBee
compatible systems. This transmitter sends wireless radio signals that are used to remotely control a
compatible system.
2.This ZigBee remote supports 1 group for binding lighting devices and enables to control RGB and
CCT ZigBee lighting devices.
ZigBee 3.0
3VDC (CR2430)
2.4GHz
30m
IP20
0.1%-100%
86x86x14mm
• Diagnostics
• Ota • Color control