Using The Remote; Speci Cations - Avantree Orbit Pro User Manual

User Manual

Using the Remote

The Orbit Pro comes with a remote controller that
enables you to adjust the volume of your Orbit Pro
from a distance. Simply press the "+" and "-" buttons on
the remote to adjust the volume to your preference.
If your remote runs out of power, you can replace the
battery with any CR2025 3V Lithium battery. Use your
thumb and index nger simultaneously to squeeze
and pull the battery tray o the remote, replace the
dead battery with a fresh one, then push the tray
slightly to slide it back into place.

Speci cations

Bluetooth version
Audio input ports
Supported audio
format
Supported pro les
Audio codecs
Operating range
Battery for the remote
Product dimensions
Input voltage / current
Net weight
22
v5.0
Optical, AUX 3.5mm, RCA(only for
TV); HDMI ARC
Dolby/DTS; PCM / LPCM
A2DP, AVRCP
aptX low latency, FastStream,aptX, SBC
Up to 164ft / 50m
CR2025 Lithium cell 3V
8.5 cm x 8 cm x 10 cm
DC5.0V / 500Ma-2A
225g
ORBIT PRO