Advertisement
KB950-KD
KB950 Package Contents
Left and Right Legs
Front and Rear Support Bars
T-Bar
Seat Base (with strap)
Seat Back (with labels)
¼-20 x 2" Bolts (12 pc)
Lock Washers (12 pc)
5/32" Hex Key (2 pc)
Assembly Instructions
1. Thread one lock washer on each of the bolts.
2. Assemble the t-bar and seat base by inserting bottom of t-bar into the recess on the seat
surface.
3. Attach the seat base and t-bar to the right leg.
4. Attach the front and rear support bars to the right leg. The textured side of the bars should
be facing out and the small holes facing the floor.
5. Attach the seat back to the right leg. Warning label should be facing into the seating area.
6. Lay the partially assembled chair on the right leg so that the components are facing up and
place the left leg on top. Attach the seat to the left leg.
7. Attach the remaining pieces to the left leg.
8. Double check that all bolts are tight. Do not over-tighten.
Check and tighten all connections
Do not over-tighten
Koala Kare Products
6982 South Quentin St., Centennial, CO 80112-3945
Diner High Chair Assembly Instructions
A Division of Bobrick
Main 303.539.8300 Toll Free 888.733.3456
Koalabear.com
Fax 303.539.8399
P/N 1387 - September 2023
Advertisement
