Koala Kare KidSitter Usage Instructions

Koala KidSitter
Usage Instructions
® ®
Dual Use Plastic High Chair and Infant Seat Cradle
TO CONVERT FROM THE HIGH CHAIR POSITION TO AN INFANT SEAT CRADLE
Koala Kare Products
A Division of Bobrick
6982 South Quentin St., Centennial, CO 80112
TO USE THE KIDSITTER
• Ensure that the plastic seat is positioned
on the top of the legs and that the
warning label is visible.
• Release the strap from the buckle on the
outside of the high chair leg.
• Pull the strap through the hole on the side
of the seat where the buckle is located.
• Release the buckle that secures the strap and pull it through both holes on the seat.
• Lift the seat upwards, allowing it to pivot forward between the high chair legs.
• Product now allows for an infant car seat carrier to be placed where the seat was located.
Position the infant car seat carrier so that it is secure between the legs of the product.
Follow the directions on the labels (visible at the top of the legs) and place infant car seat
carrier perpendicular to the round cross bar on the chair, so that the child is facing away
from suspended seat.
• When the infant car seat carrier is securely in place, the strap must be tightly fastened
across the infant car seat carrier. To secure the infant car seat carrier, position the strap
across the middle section of the infant car seat carrier. Thread strap through the buckle on the
high chair leg and adjust until it fits securely against the infant car seat carrier.
Main 303.539.8300 Toll Free 888.733.3456 Fax 303.539.8399
®
AS A HIGH CHAIR
®
This product is designed to be used as
a high chair or an infant seat cradle to
secure an infant seat carrier.
• Place child in the high chair.
• Rethread the strap through the hole
in the seat and into the buckle.
• Once child is in place, adjust the strap
until it fits securely against the child's
waist, ensuring that the buckle is
tightly latched.
Koalabear.com
P/N 1276 November 2016